Arthroscopy Irrigation Set - Carton
Arthroscopy Irrigation Set - Carton is designed to deliver continuous, pressurised sterile fluid into a joint space during arthroscopic procedures. It also features dual spike, 265cm length, manual hand pump and stepped connector with silicone tubing.
Features:
- Soft material
- Length: 265cm
- Double spike Y-site configuration
- Manual hand pump
- 3 click clamps
- Multiple connector configurations
- Type: Sterile/Non-Sterile
- Single Use
- Size: 265cm
- ARTG:272624
Product Data:
| Tubing length: | 220cm |
| Tubing inner diameter: | 4.8mm |
| Tubing outer diameter: | 6.8mm |
| Priming volume: | UR010000 90.0mL |
| Priming volume: | UR010002 74.0mL |
| Flow rate (80cm): | 22L/hr |
| Material: | PVC |
| DEHP NO = | Not detected (Result less than the Method Detection Limit EN 14372) |
| ARTG Number: | 314960 |
| Shelf Life | 5 Years |
Steps:
- Close click clamps.
- Hang fluid bags and remove protective cover from bag spike outlets.
- Remove protective caps from spikes of the irrigation set and insert into fluid bag using aseptic technique.
- To prime the irrigation line, invert flexible pump chamber and open the click clamps until the fluid flows out through the silicone tubing adaptor/male luer lock connector, checking that all air has been expelled.
- Close click clamps.
- Connect and secure by attaching the silicone tubing adaptor/male luer lock connector to the inline port on the arthroscope/ instrumentation sheath.
- Control flow rate using the click clamps until desired flow rate is achieved.
- Squeezing the flexible pump chamber will provide a push of fluid to flush the irrigation set if required to assist in clearing the surgical view
